Model No.: XY-1
2.light weight,easy move
XY-1A Core Drilling Rig
is a light type machine at high speed with hydraulic feeding. XY-1A (YJ) and XY-1A-1 are designed on the basis of XY-1A.
1. Drillings for the general exploration and investigation of solid mineral deposit, engineering geotectonic survey and concrete structure inspection holes.
2.Diamond drill bit, alloy drill bit and steel roller drill bit and so on are available for drilling according to different geological structures.
3.When the final holes are respectively 75mm and 46mm in diameter, the rated hole depths are separately 100m and 180m. The maximum of depth may not exceed 110% of that drilled in each hole. The maximum allowable hole diameter is 150 mm.
1.With hydraulic feeding device, elevated drilling efficiency, reduced labor strength.
2.The rig is equipped with an upper spherical jaw holding mechanism and hexagonal drive drilling rod which can be replaced without shutdown, high efficiency, safe and reliable.
3. A hole bottom pressure gauge is mounted indicating the pressure in order to control the status inside the hole.
4.Compact structure, small volume, lightweight, high detachability, easy transportation and suitable for the operations in plains or mountain areas.Technical Specifications
Drilling depth 100/180 m
Initial hole dia. 150mm
Final hole dia. 75/46mm
Drill rod dia. 42/43mm
Angle range 90°-75°
Weight(without power unit) 620kg
Migration distance 350mm
Spindle speed(5-speed) 1010/790/470/295/140r/min
Spindle stroke 450mm
Upward displacement speed of idling vertical spindle 0.05m/s
Downward displacement speed of idling vertical spindle 0.067m/s
Spindle pull-down max 15KN
Spindle lifting capacity max 25KN
Max .lifting capacity(single rope) 15KN
Lifting rotating speed 121/76/36r/min
Hoisting drum linear velocity (two levels) 0.166/0.331/0.733/1.465m/s
Drum dia. 140mm
Wire rope dia. 9.3mm
Wire rope capability 35m
Brake dia. 252mm
Brake belt width 50mm
Rated pressure 8Mpa
Rated speed 1500r/min
Power (diesel engine or motor)
Model (diesel engine) S1100A2
Rated power 10.3KW
Rated speed 2200r/min
Model (motor) Y160M-4
Rated power 11KW
Rated speed 1460r/min
Model Horizontal reciprocating single-acting piston pump
Equipped with diesel engine 95L/min
Equipped with motor 77L/mm
Allowable working pressure max 1.2Mpa
Continuous working pressure 0.7Mpa
Suction pipe dia 32mm
Discharge pipe dia 25mm
Used for general investigation, geophysical exploration, high-way and building construction, and blast-hole drilling etc.With hydro-automatic feeding device, and high drilling efficiency.Designed with hydro-chucking unit instead of slips to ensure drilling from stop when changing pipes.Close levers, convenient to operate, safe and reliable operations.Compact in structure. All the drill, water pump and diesel engine installed on one base frame result in space-saving.Light in weight, easy disassembling for transportation and applicable to working conditions in plain and mountain areas. Contact us if you need more details on Core Drill Rig. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Core Rig、Core Drilling Rig. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Core Drill Rig
Premium Related Products